Techno Press
Tp_Editing System.E (TES.E)
Login Search


    Hong-Nan Li
    Faculty of Infrastructure Engineering
    Dalian University of Technology
    Dalian 116024, China
    Satish Nagarajaiah
    Dept. of Civil and Environmental Eng.
    Rice University
    Houston TX 77005, USA
    Jeong-Tae Kim
    Ocean Engineering Dept
    Pukyong National University
    Busan 608-737, Korea
    Claus-Peter Fritzen
    Inst. of Mech. & Control Eng. Mechatronics
    University of Siegen
    D-57068 Siegen, Germany
Associate Editor
    Ting-Hua Yi
    School of Civil Engineering
    Dalian University of Technology
    Dalian 116023, China
Managing Editor
    Prof. Chang-Koon Choi
    Korea Advanced Institute of Science & Technology
    Daejeon 305-701, Korea

ISSN:2288-6605(Print) ISSN:2288-6613(Online)
Vol 4(4 issues) for 2017, Quarterly
Aims and Scope

The Structural Monitoring and Maintenance, An International Journal, aims at the valuable source of information and excellent publication channel for the global community of structural monitoring and maintenance of structures.

The journal publishes the high quality papers within the journal scope:

     ♦ Environmental loads and effects,
     ♦ Spot/Periodic/Permanent/Online monitoring,
     ♦ Identification/Diagnosis/Assessment/Decision analysis,
     ♦ Design/Retrofit/Maintenance/Renewal/Risk management
     ♦ and related areas of structural engineering.
Editorial Board

Prof. Francis T.K. Au
University of Hong Kong
Pokfulam Road, Hong Kong

Dr. Dong Bo
Inst for Infocomm Res(I2R)
138632, Singapore

Prof. Oreste S. Bursi
Univ of Trento
Trento 77-38123, Italy

Prof. Elsa de Sá Caetano
University of Porto
4200-465 Porto, Portugal

Prof. Steve C.S. Cai
Louisiana State University
LA 70803, USA

Prof. Joan R. Casas
Technical Univ of Catalunya
Barcelona 08034, Spain

Prof. Necati Catbas
niv of Central Florida
FL 32816-2450, USA

Prof. Eleni Chatzi
CH-8093 Zürich, Switzerland

Prof. Gian Paolo Cimellaro
Politecnico di Torino
10129 Turin, Italy

Dr. C.F. Cremona
Cedex 77487, France

Dr. Marco Domaneschi
Politecnico di Torino
10129 Turin, ltaly

Prof. Lev Eppelbaum
Tel Aviv University
Tel Aviv 69978, Israel

Prof. M.S. Fallahnezhad
Yazd University
Yazd, Iran

Prof. Spilios D. Fassois
University of Patras
Patras GR-26504, Greece

Prof. Branko Glišic
Princeton University
Princeton, NJ 08544, USA

Prof. Stefan Hurlebaus
Texas A&M University
TX 77843-3136, USA

Dr. Sakdirat Kaewunruen
RailCorp - Track Eng.
Sydney NSW2000, Australia

Prof. Sher Bahadar Khan
King Abdulaziz University
Jeddah 21589, Saudi Arabia
Prof. C.W. Kim
Kyoto University
Kyoto 606-8501, Japan

Prof. Nam-Sik Kim
Pusan Nat'l University
Pusan 609-735, Korea

Prof. Jung Sik Kong
Korea University
Seoul 136-701, Korea

Prof. Tribikram Kundu
Univ of Arizona
AZ 85721, USA

Prof. Ying Lei
Xiamen Univ
Fujian 361005, China

Prof. Hui Li
Harbin Inst. of Tech.
Harbin, 150001, China

Prof. Qiu-Sheng Li
City Univ of Hong Kong
Kowloon, Hong Kong

Prof. Kenneth J. Loh
Univ of California
CA 95616-5294, USA

Prof. Paolo Maria Mariano
Univ of Firenze
Firenze I-50139, Italy

Prof. Alessandro Marzani
Univ of Bologna
Bologna 40136, Italy

Prof. Aldo Minardo
Second Univ. of Naples
81031 Aversa, Italy

Prof. Won-Bae Na
Pukyong Nat'l University
Pusan 608-737, Korea

Prof. Tomonori Nagayama
Univ of Tokyo
Tokyo 113-8654, Japan

Prof. Yi-Qing Ni
The Hong Kong Polytechnic U.
Kowloon, Hong Kong

Prof. Shamim Pakzad
Lehigh University
Bethlehem, PA 18015-4729, USA

Prof. Costas Papadimitriou
Univ of Thessaly
Pedion Areos 38334, Greece

Prof. Gyuhae Park
Chonnam Nat'l University
Gwangju 500-757, Korea

Prof. Carlo Pellegrino
Univ of Padova
9-35131 Padova, Italy
Prof. Costas P. Providakis
Technical U. Crete
Chania GR-73100, Greece

Prof. Pizhong Qiao
Washington State University
WA 99164-2910, USA

Prof. B.N. Rao
Indian Inst of Tech Madras
Chennai 600036, India

Prof. Salvatore Salamone
Univ at Buffalo
NY 14260, USA

Prof. Gangbing Song
Univ of Houston
TX 77204-4006, USA

Dr. Jyoti K. Sinha
University of Manchester
Manchester, M13 9PL, UK

Prof. Christos Spitas
Delft Univ of Technology
Delft 2628CE, Netherlands

Prof. Wieslaw J. Staszewski
AGH University of Sci. and Tech.
30-962 Krakow, Poland

Prof. A.D. Tsonos
Aristotle Univ of Thessaloniki
Thessaloniki GR 54124, Greece

Prof. Humberto Varum
Univ of Aveiro
3810-193 Aveiro, Portugal

Prof. Volkovas Vitalijus
Kaunas Univ. of Technology
44312 Kaunas, Lithuania

Prof. Jinling Wang
Univ of New South Wales
Sydney NSW 2052, Australia

Prof. Qing Wang
Shandong Univ. of Sci.Technol
Qingdao 266590, China

Prof. Zhishen Wu
Ibaraki University
Ibaraki 316-8511, Japan

Dr. Ruqiang Yan
Southeast University
Nanjing 210096, China

Prof. Ka-Veng Yuen
Univ of Macau
Macao, China

Prof. Hyun Do Yun
Chungnam Nat'l University
Daejeon 305-764, Korea

Prof. Daniele Zonta
University of Trento
38123 Trento, Italy

Guide to Authors

1. Submission of the paper
Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) ( Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers.

2. Preparation of the manuscript
General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 14-20 journal pages. There will be no page charges and no other fees unless the author wishes arrangements to provide an open access to his article. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures are required at the end of the manuscript for reference in editing.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide of the instruction.

3. Review
All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs
Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright
Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics
Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors ( Violation of publication ethics will result in the activation of COPE flow chart. (

7. Publication Fee
Except for open access articles, there is no page charge or article processing fee for submission and publication in this journal.

Inaugural Issue yet to come.
Table of Contents
  • 2017  Volume 4      No. 1  
  • 2016  Volume 3      No. 1      No.2    No.3    No.4
  • 2015  Volume 2      No. 1      No.2    No.3    No.4
  • 2014  Volume 1      No. 1      No.2    No.3    No.4

    2017 Subscription Rates in US$ :

    Structual Monitoring and Maintenance Volume 4 (4 issues)

    Print +e

    Online +c

    Print & Online

















    C: Complimentary access N: Not available (N/A)
    Orders are accepted by calendar year only.

    1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
    2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
    3. PRINT & ONLINE: Subscribers have benefits of both subscription categories.

    *: The surface delivery is possible only to the countries listed

    Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2017 Techno-Press
    P.O. Box 33, Yuseong, Daejeon 34186 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: