Techno Press
Techno Press

You have a Free online access/download for a limited time.
Advances in Concrete Construction   Volume 6, Number 6, December 2018, pages 561-583
DOI: http://dx.doi.org/10.12989/acc.2018.6.6.561
 
Effect of PCE superplasticizers on rheological and strength properties of high strength self-consolidating concrete
S.D. Bauchkar and H.S. Chore

 
Abstract     [Full Text]
    A variety of polycarboxylate ether (PCE)-based superplasticizers are commercially available. Their influence on the rheological retention and slump loss in respect of concrete differ considerably. Fluidity and slump loss are the cardinal features responsible for the quality of concrete. These are related to the dispersion of cement particles and the hydration process which are greatly influenced by type of polycarboxylate ether (PCE)-based superplasticizers. On the backdrop of relatively less studies in the context of rheological retention of high strength self-consolidating concrete (HS-SCC), the experimental investigations were carried out aiming at quantifying the effect of the six different PCE polymers (PCE 1-6) on the rheological retention of HS-SCC mixes containing two types of Ordinary Portland Cements (OPC) and unwashed crushed sand as the fine aggregate. The tests that were carried out included T500, V-Funnel, yield stress and viscosity retention tests. The supplementary cementitious materials such as fly ash (FA) and micro-silica (MS) were also used in ternary blend keeping the mix paste volume and flow of concrete constant. Low water to binder ratio was used. The results reveal that not only the PCEs of different polymer groups behave differently, but even the PCEs of same polymer groups also behave differently. The study also indicates that the HS-SCC mixes containing PCE 6 and PCE 5 performed better as compared to the mixes containing PCE 1, PCE 2, PCE 3 and PCE 4 in respect of all the rheological tests. The PCE 6 is a new class of chemical admixtures known as Polyaryl Ether (PAE) developed by BASF to provide better rheological properties in even in HS-SCC mixes at low water to binder mix. In the present study, the PCE 6, is found to help not only in reduction in the plastic viscosity and yield stress, but also provide good rheological retention over the period of 180 minutes. Further, the early compressive strength properties (one day compressive strength) highly depend on the type of PCE polymer. The side chain length of PCE polymer and the fineness of the cement considerably affect the early strength gain.
 
Key Words
    workability; rheology; rheological retention; polycarboxylate ether; polyaryl ether
 
Address
S.D. Bauchkar: Admixture Systems, BASF India Ltd., C-405 and 407, MIDC, Thane Belpaur Road, Turbhe, New Mumbai, 400 613, India
H.S. Chore: Department of Civil Engineering, Dr. B.R. Ambedkar National Institute of Technology Jalandhar, G.T. Bye Pass Road, Jalandhar, 144011, India
 
References
    -acc0606001-
 

Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2019 Techno Press
P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: technop@chol.com