Techno Press


Steel and Composite Structures   Volume 11, Number 2, March 2011, pages 131-147
DOI: http://dx.doi.org/10.12989/scs.2011.11.2.131
 
Elasto-plastic behaviour of perforated steel plates subjected to compression and bending
Emanuele Maiorana, Carlo Pellegrino and Claudio Modena

 
Abstract     [Full Text]
    The aim of this work is to provide some insights into the elasto-plastic behaviour of plate girder web square and rectangular panels with centred and eccentric holes under both compression and in-plane bending moment. The numerical study was validated comparing the numerical results obtained for one simple steel plate configuration with the corresponding experimental results, obtained at the University of Padova, observing the influence of the initial out-of-plane imperfections on the force vs. displacement relationship and ultimate strength. Once validated the numerical approach, the effect of bending moment on the stability of the plate is studied and some differences with respect to the uniform compression load case are shown. The influence of dimension and position of the hole, the plate aspect ratio and the steel grade on elasto-plastic behaviour is observed. Some indications regarding the critical slenderness (at which transition from elastic to plastic collapse occurs) are given for square and rectangular plates with symmetric and eccentric holes having small, medium and large diameter.
 
Key Words
    steel girder; perforated plate; elasto-plastic analysis; in-plane loading.
 
Address
Department of Structural and Transportation Engineering, University of Padova, Via Marzolo 9, 35131 Padova, Italy
 

Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2019 Techno Press
P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: technop@chol.com