Techno Press
Techno Press

Steel and Composite Structures   Volume 16, Number 6, June 2014, pages 657-679
DOI: http://dx.doi.org/10.12989/scs.2014.16.6.657
 
Compression tests of cold-formed channel sections with perforations in the web
Young Bong Kwon, Gap Deuk Kim and In Kyu Kwon

 
Abstract     [Full Text]
    This paper describes a series of compression tests performed on cold-formed steel channel sections with perforations in the web (thermal studs) fabricated from a galvanized steel plate whose thickness ranged from 1.0 mm to 1.6 mm and nominal yield stress was 295 MPa. The structural behavior and performance of thermal studs undergoing local, distortional, or flexural-torsional buckling were investigated experimentally and analytically. The compression tests indicate that the slits in the web had significant negative effects on the buckling and ultimate strength of thin-walled channel section columns. The compressive strength of perforated thermal studs was estimated using equivalent solid channel sections of reduced thickness instead of the studs. The direct strength method, a newly developed and adopted alternative to the effective width method for designing cold-formed steel sections in the AISI Standard S100 (2004) and AS/NZS 4600 (Standard Australia 2005), was calibrated to the test results for its application to cold-formed channel sections with slits in the web. The results verify that the DSM can predict the ultimate strength of channel section columns with slits in the web by substituting equivalent solid sections of reduced thickness for them.
 
Key Words
    thermal studs; slits; perforations; ultimate strength; equivalent thickness; direct strength method
 
Address
(1) Young Bong Kwon:
Department of Civil Engineering, Yeungnam University, Gyongsan, 712-749, Korea;
(2) Gap Deuk Kim:
Department of Steel Research, RIST, Incheon, Korea;
(3) In Kyu Kwon:
Department of Fire Protection Engineering, Kangwon National University, Samcheok, Korea.
 

Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2019 Techno Press
P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: technop@chol.com