Techno Press


Steel and Composite Structures   Volume 2, Number 6, December 2002, pages 461-474
DOI: http://dx.doi.org/10.12989/scs.2002.2.6.461
 
Pure bending creep of SUS 304 stainless steel tubes
Kuo-Long Lee and Wen-Fung Pan

 
Abstract     [Full Text]
    This paper presents the experimental and theoretical results of SUS 304 stainless tubes with different diameter-to-thickness ratio (D/t ratio) subjected to pure bending creep. Pure bending creep occurs when a circular tube is bent to a desired moment and held at that moment for a period of time. It was found that the magnitudes of the creep curvature and ovalization of tube cross-section increase faster with a higher hold moment than that with a lower one. Due to continuously increasing curvature, the circular tubes eventually buckle. Finally, a theoretical form was proposed in this study so that it can be used to describe the relationship between the creep curvature and time. Theoretical simulations are compared with the experimental test data, showing that good agreement between the experimental and theoretical results has been achieved.
 
Key Words
    pure bending creep; SUS 304 stainless steel tube; diameter-to-thickness ratio; creep curvature; ovalization.
 
Address
Department of Mechanical Engineering, Far East College, Tainan, Taiwan, R.O.C.rnDepartment of Engineering Science, National Cheng Kung University, Tainan, Taiwan, R.O.C.
 

Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2019 Techno Press
P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: technop@chol.com