Techno Press
Techno Press

Steel and Composite Structures   Volume 22, Number 6, December30 2016, pages 1391-1415
DOI: http://dx.doi.org/10.12989/scs.2016.22.6.1391
 
Evaluation of limit load analysis for pressure vessels – Part I: Linear and nonlinear methods
Xiaohui Chen, Bingjun Gao and Xingang Wang

 
Abstract     [Full Text]
    Limit load of pressure bearing structures was reviewed in this article. By means of the finite element analysis, limit load of pressurized cylinder with nozzle was taken as an example. Stress classification method and Elastic-plastic finite element analysis combining with limit load determination methods were used to determine limit load of cylinder with nozzle. Comparison of limit load determined by different methods, the results indicated that limit load determined by linearization method was the smallest. Limit load determined by twice elastic slope criterion was the nearest than experimental results. Elastic-plastic finite element analysis had comparably computational precision, but required time consuming. And then the requirements of computer processing and storage capacity by power system became higher and higher. Most of criteria for limit load estimation included any human factors based on a certain substantive characteristics of experimental results. The reasonable criterion should be objective and operational.
 
Key Words
    pressure vessel; limit load; estimation criteria; ANSYS
 
Address
(1) Xiaohui Chen, Xingang Wang:
School of Control Engineering, Northeastern University, Qinhuangdao, 066004, China;
(2) Xiaohui Chen:
College of Mechanical Engineering, Yanshan University, Qinhuangdao, 066004, China;
(3) Bingjun Gao:
School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin, 300000, China.
 

Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2019 Techno Press
P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: technop@chol.com