Techno Press
Techno Press

Steel and Composite Structures   Volume 26, Number 6, March25 2018, pages 719-731
DOI: http://dx.doi.org/10.12989/scs.2018.26.6.719
 
Experimental study on the seismic performance of concrete filled steel tubular laced columns
Zhi Huang, Li-Zhong Jiang, Y. Frank Chen, Yao Luo and Wang-Bao Zhou

 
Abstract     [Full Text]
    Concrete filled steel tubular (CFST) laced columns have been widely used in high rise buildings in China. Compared to solid-web columns, this type of columns has a larger cross-section with less weight. In this paper, four concrete filled steel tubular laced columns consisting of 4 main steel-concrete tubes were tested under cyclic loading. Hysteresis and failure mechanisms were studied based on the results from the lateral cyclic loading tests. The influence of each design parameter on restoring forces was investigated, including axial compression ratio, slenderness ratio, and the size of lacing tubes. The test results show that all specimens fail in compression-bending-shear and/or compression-bending mode. Overall, the hysteresis curves appear in a full bow shape, indicating that the laced columns have a good seismic performance. The bearing capacity of the columns decreases with the increasing slenderness ratio, while increases with an increasing axial compression ratio. For the columns with a smaller axial compression ratio (< 0.3), their ductility is increased. Furthermore, with the increasing slenderness ratio, the yield displacement increases, the bending failure characteristic is more obvious, and the hysteretic loops become stouter. The results obtained from the numerical analyses were compared with the experimental results. It was found that the numerical analysis results agree well with the experimental results.
 
Key Words
    concrete filled steel tubular laced columns; seismic performance; low cyclic loading; restoring force model; hysteresis curve
 
Address
(1) Zhi Huang, Li-Zhong Jiang, Yao Luo, Wang-Bao Zhou:
School of Civil Engineering, Central South University, Changsha 410075, China;
(2) Zhi Huang:
School of Civil Engineering, Hunan University of Science and Technology, Xiangtan 411201, China;
(3) Y. Frank Chen:
School of Engineering and Technology, Southwest University, Chongqing 400716, China;
(4) Y. Frank Chen:
Department of Civil Engineering, The Pennsylvania State University, Middletown 17057, PA, USA.
 

Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2019 Techno Press
P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: technop@chol.com