Techno Press
Techno Press

Steel and Composite Structures   Volume 3, Number 2, April 2003, pages 123-140
DOI: http://dx.doi.org/10.12989/scs.2003.3.2.123
 
Flexural behavior and resistance of uni-planar KK and X tubular joints
Yiyi Chen and Wei Wang

 
Abstract     [Full Text]
    The importance of the research on moment-resistant properties of unstiffened tubular joints and the research background are introduced. The performed experimental research on the bending rigidity and capacity of the joints is reported. The emphasis is put on the discussion of the flexural behavior of the joints including sets of geometrical parameters of the joints and several loading combinations. Procedures and results of loading tests on four full size joints in planar KK and X configuration are described in details at first. Mechanical models are proposed to analyze the joint specimens. Three-dimensional nonlinear FE models are established and verified with the experimental results. By comparing the experimental data with the results of the analysis, it is reported reasonable to carry out the structural analysis under the assumption that the joint is fully rigidly connected, and their bending capacities can assure the strength of the members connected under certain limitation. Furthermore, a parametric formula for inplane bengding rigidity of T and Y type tubular joints is proposed on the basis of FE calculation and regression analysis. Compared with test results, it is shown that the parametric formula developed in this paper has good applicability.
 
Key Words
    unstiffened tubular joint; flexural behavior; bending rigidity; loading test; non-linear FE analysis; joint rigidity evaluation.
 
Address
Department of Building Engineering, Tongji University, Shanghai 200092, China
 

Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2019 Techno Press
P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: technop@chol.com