Techno Press
Techno Press

Steel and Composite Structures   Volume 9, Number 2, April 2009, pages 173-189
DOI: http://dx.doi.org/10.12989/scs.2009.9.2.173
 
Investigations on the bearing strength of stainless steel bolted plates under in-plane tension
G. Kiymaz

 
Abstract     [Full Text]
    This paper presents a study on the behavior and design of bolted stainless steel plates under in-plane tension. Using an experimentally validated finite element (FE) program strength of stainless steel bolted plates under tension is examined with an emphasis on plate bearing mode of failure. A numerical parametric study was carried out which includes examining the behavior of stainless steel plate models with various proportions, bolt locations and in two different material grades. The models were designed to fail particularly in bolt tear-out and material piling-up modes. In the numerical simulation of the models, non-linear stress-strain material behavior of stainless steel was considered by using expressions which represent the full range of strains up to the ultimate tensile strain. Using the results of the parametric study, the effect of variations in bolt positions, such as end and edge distance and bolt pitch distance on bearing resistance of stainless steel bolted plates under in-plane tension has been investigated. Finally, the results obtained are critically examined using design estimations of the currently available international design guidance.
 
Key Words
    stainless steel; finite element analysis; bolted connection; bearing failure mode; strength reduction.
 
Address
G. Kiymaz; Department of Civil Engineering, Faculty of Engineering and Architecture, Istanbul Kultur University,
Atak? Campus, Bakirk?, Istanbul, Turkey
 

Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2019 Techno Press
P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: technop@chol.com